Your cart is empty
|
SERVICE PRICE LIST (LABOR ONLY --- PARTS, MATERIALS NOT INCLUDED) |
|
|
|
|
Description |
Price Per Hour or Incident |
| Per Man Hour | $45.00 | |
| Per Machine Hour | $55.00 | |
| Minimum Charge Per Gun | $35.00 | |
| Written Appraisals | $30.00 | |
| Metal Finishing/Rebluing | Matte Finish | $120.00 |
| Polished - Handgun | $130.00 | |
| Polished - Rifle | $150.00 | |
| High Polish - Handgun | $265.00 | |
| High Polish - Rifle | $300.00 | |
| Slow Rust Bluing | $250.00 | |
| Spray-on Finishes (Single color; does not include cost of assembly/disassembly) | Cerakote | $150.00 |
| KG Gunkote | $110.00 | |
| DuraCoat | $75.00 | |
| Parkerizing | $150.00 | |
| Sight Work | Sight in Gun (Does not Include Ammo/Targets) | $50.00 |
| Bore Sighting | $20.00 | |
| Drill & Tap Barrel or Receiver for Sights | $50.00 | |
| Install Dovetail Sight | $25.00 | |
| Install Front Sight | $50.00 | |
| Scope Mounting | $40.00 | |
| General Barrel, Action and Rifle Work | Check Headspace | $35.00 |
| Make Chamber Cast | $50.00 | |
| Remove Stuck Fired Case From Chamber | $50.00 | |
| Remove Stuck Live Round from Chamber | $50.00 + | |
| Remove Bore Obstruction | Hourly Rate | |
| Remove Fouling | Hourly Rate Plus Material | |
| Lap Barrel | $50.00 | |
| Install Barrel Liner (not including cost of liner) | $50.00 | |
| Cut and Crown Barrel | $45.00 | |
| Install Pre-Threaded and Chambered Barrel | $125.00 | |
| Lap in Bolt Lugs (Not including fitting new barrel) | $125.00 | |
| Welding on New Bolt Handle | $50.00 | |
| Handgun Work | Semi-Auto Pistol Action Job (clean, smooth action, not including any parts | $120.00 |
| Tighten Slide - 1911 Auto | $120.00 | |
| Fit Barrel - 1911 Auto Non-Ramped | $90.00 | |
| Fit Barrel - 1911 Auto Ramped | $100.00 | |
| Fit and Install Barrel Bushing 1911 Auto (not including cost of bushing) | $50.00 | |
| Bevel Magazine Well - 1911 Auto | $35.00 | |
| Throat, Polish Barrel and Feed Ramp - 1911 Auto | $40.00 | |
| Fit New Trigger - 1911 Auto | $45.00 | |
| Stipple Polymer Frame | $50.00 | |
| Stock Work | Wood Finishing / Hunter Finish | $150.00 |
| Gunsmith Finish | $200.00 | |
| Recutting Checkering (other than hourly or by panel) | $50.00 | |
| Recutting Checkering - Complicated Pattern | $75.00 | |
| Glass Bedding Barrel & Action - Hunting Rifle | $85.00 | |
| Match Rifles | $150.00 | |
| Pillar Bed | $160.00 | |
| Install Recoil Pad | $40.00 | |
| Install Adjustable Butt Plate | $80.00 | |
| Install Sling Swivels - Std & QD | $35.00 | |
| Install Recoil Reducers - Simple | $25.00-$50.00 | |
| Install Recoil Reducers - Hydrolic Butt Plate Style | $150.00 | |
| Inletting and Finishing Semi Finished Stock | $200.00 | |
| Fit, Bed and Finish Fiberglass Stock Blank | $175.00 | |
| Prefinished Synthetic Stock - Fit and Install Barreled Action | $70.00 | |
| AR-15 / AR-10 Work | Maintenace Cleaning | $65.00 |
| Maintenance Rebuild | $120.00 | |
| Install Aftermarket Trigger | $40.00 | |
| Install Aftermarket Forend/Free-Float | $45.00 | |
| Assemble Complete Upper | $45.00 | |
| Assemble Complete Lower | $45.00 | |
| Assemble Complete Rifle | $80.00 | |
| Install Flash Hider | $25.00 | |
| Open Gas Ports for Functioning | $60.00 | |
| Install or Replace Gas Block | $35.00 | |
| Install or Replace Barrel | $55.00 | |
| Install or Replace Buttstock or Buffer | $20.00 | |
Shipping Instructions
Shipping a firearm to a Federal Firearms License holder, such as High Angle Gun Works Inc, for purposes of repair or conversion is completely legal. The following steps may help you:
Identify Your Needs
Identify what you need done to your firearm. Ensure we can accomplish the work you desire. Document your requirements in a letter or the Work Order Form supplied on our site under the Gunsmithing Services tab at the top and the Work Order Form linked. Please ensure handwritten letters are legible.
Include the following in the letter:
First and Last Name
Physical Address (no P.O. Boxes)
Daytime Phone Number
Email address
Type of Gun
Serial Number
Model
Caliber
Inventory of Extraneous Parts or Accessories
List of Required Work
Include a copy of the letter in the same box as your firearm and retain a copy for your records. If you are using the supplied form, then print two copies of the form.
Custom Builds
Any personalized request or an estimated value of the work to be perform is $3000.00 or more, then we require half down as a deposit to begin work. Orders below $3000.00 require a $500.00 deposit. Cancellation of orders forfeit all deposits.
Packing Your Firearm
Use a sturdy cardboard box. FedEx or UPS Express boxes are great for this purpose. Pack your weapon using bubble wrap, air pillows, foam or packing paper. Avoid taping your packing material or using anything that would require a sharp box cutter near your weapon which we are unable to see until it is unwrapped. Include your letter in the box you are shipping.
Disassembled firearms, sent as parts, may result in additional service fees starting at $100.00, depending on the quantity of parts.
Do NOT include ammunition with your firearm. It must be shipped separately!
Do NOT include any payments unless required by High Angle Gun Works Inc as a deposit!
Shipping Your Firearm
Firearms can be shipped directly to High Angle Gun Works Inc for the purpose of repair or alteration and returned to the same address it came from with an adult signature. We cannot return shipment to any other location without the express written consent of the firearm owner. All firearms must be packaged and have an appropriate label attached to the box before FedEx or UPS will accept it for shipment.
Handguns:
If you are shipping an entire handgun, it must be shipped via FedEx or UPS Next Day Air to have any insurance claims honored. Regulations require you to declare your shipment as a firearm.
Rifles:
Rifles may be shipped FedEx or UPS Ground.
Parts:
If all you are shipping is a Frame, receiver or parts, you can ship via any carrier including U.S. Postal Service.
Ship the firearm to the following address:
High Angle Gun Works Inc
604 Jarvis Gore Dr.
Eddington, ME 04428
Your firearm will be returned to the address from where it was received. Do NOT use the address of the shipping hub! Insure the weapon for replacement value.
Delivery of Your Firearm
Upon receiving your firearm, High Angle Gun Works Inc will check in your weapon, create a Work Order and email a copy of the Work Order back to you. The work order will include the work to be performed, an estimate of the cost and an estimated time of completion. They are estimates ONLY and can vary depending on work to be performed. You will need to ensure the work to be performed on your weapon is correct. Work will not begin until your work order is correct. NO MONEY is due until all work is completed.
Updates to Your Work Order
You are welcome to call us to make changes to your work order, but changes will not be considered official until they are received in writing (email is sufficient). When changes are requested, the work order must be modified in the computer. We must then print a copy of the modified work order and make sure the original work order is replaced. If the changes involve parts, we must remove and restock the parts originally requested and replace with other parts. This process is time consuming and invites errors. However, we will allow one change (parts or services) free if work has not progressed too far. Additional changes will cost $25.00 each in additional to the work.
Changes to return address must be done in writing via Letter or Email.
Cancellation of Orders
You may cancel your order at any time. Cancellations must be done in writing, via Letter or Email. Cancellations will result in forfeiture of all deposits.
Completion of Work Order
Upon completion of the work order, High Angle Gun Works Inc staff will notify you that your firearm is ready and of the final total including return shipping. We will at that time collect your form of payment. The weapon will be shipped back to the address from where we received it. Changes to the original address will require written notification (email is sufficient). Handguns will be shipped via FedEx Express 2 Day shipping. Rifles will be shipped FedEx Ground. All complete guns shipped via FedEx require adult signature.
Custom Builds
If you have ordered a new Custom Build, the firearm must be sent to a Federal Firearms License (FFL) holder. We must have a copy of that holders FFL before the gun can be shipped.